Pertex method note

Pertex Fabric: A Wholesale Buyer's Guide to Waterproof Breathable Textiles

2026-08-28 · Lucia Bianchi

If you're sourcing fabric for outdoor apparel, here's the short version: Pertex Shield and Pertex Quantum are two completely different product families, and conflating them has cost me real money. You need to know which one fits your end use before you ask for a quote—because if you don't, you'll likely specify the wrong membrane, pay for performance you don't need, or skip a water resistance level that your customer actually expects.

That's not a theoretical warning. In my first year handling wholesale fabric orders (2017), I put a $3,200 order on hold because I assumed one Pertex fabric code would cover both a hardshell jacket and a lightweight packable rain layer. It didn't. The jackets were too stiff; the rain layers weren't breathable enough. We caught it before production, but only barely—and the rework plus delay ate up most of the project margin. Since then, I've built a pre-order checklist for our team, and this guide is basically that checklist with the context I wish someone had given me.

Pertex Shield vs. Pertex Quantum: First, Know the Difference

The biggest mistake I see wholesale buyers make is treating "Pertex" as one fabric. It isn't. Pertex is a brand name that covers multiple fabric technologies, and they break into two broad categories:

  • Pertex Shield – a waterproof/breathable membrane fabric. This is what you want for hardshell jackets, rain pants, and any garment where staying dry in sustained rain is the job.
  • Pertex Quantum – a lightweight, highly packable, wind-resistant (and sometimes water-resistant) shell fabric. It's not a waterproof membrane line. It's designed for insulation layers, summit jackets, and ultralight outer layers where breathability and low weight matter more than full waterproofing.

I can't tell you how many RFQs I've seen where a brand asks for "Pertex waterproof breathable fabric" without specifying Shield. If you do that, you may get a quote for Quantum—and it won't perform the way you expect in a downpour.

Here's something vendors won't tell you: the Pertex name gets applied to the face fabric, the membrane, and sometimes the whole laminate, depending on who's selling it. So two different suppliers can both say they're offering "Pertex shield waterproof breathable fabric" and be quoting different constructions. One might be a 2-layer laminate; another might be a 3-layer. That changes hand feel, durability, and price.

Ripstop Fabric Distributor? Make Sure You're Comparing Like for Like

If you're searching for a ripstop fabric distributor, Pertex will come up often—because many Pertex fabrics use a ripstop weave. But "ripstop" is a weave construction, not a performance level. It just means the weave is reinforced with thicker yarns at intervals so that tears don't propagate as easily. A ripstop nylon can be uncoated, coated with polyurethane (PU), silicone, or laminated to a membrane. Each version behaves differently.

Most buyers focus on whether the fabric is ripstop and completely miss what coating or lamination is on it. That's the detail that determines whether your fabric is suitable for a down jacket or a rain shell.

For a hardshell jacket, you're typically looking at a 3-layer Shield laminate. For a lightweight insulated jacket, you might want a Quantum ripstop that's DWR-coated but breathable. They're both "ripstop"—but they're not interchangeable.

My rule now: get the full fabric code, not the brand name. If a supplier can't or won't tell you the full construction, that's a red flag.

Bulk Water Resistant Fabric: The Hidden Cost of Getting It Wrong

Let's talk about "bulk water resistant fabric" as a search term, because it's another place where buyers—including me, once—get into trouble. Water-resistant is not waterproof. It's a spectrum, and the difference usually comes down to hydrostatic head (how much water pressure the fabric can withstand before leaking).

A water-resistant shell with a 1,000mm hydrostatic head is fine for light drizzle. Pertex Shield, depending on the specific laminate, is often rated well above 10,000mm—that's a different product category entirely.

What most people don't realize is that the gap shows up in real use, not just on a spec sheet. I once ordered a batch of water-resistant jackets for a brand that sold them as "weatherproof." The jackets were fine in light rain, but after 20 minutes in a proper downpour, wearers felt wet at the shoulders and around the zippers. The retailer accepted returns, but the cost of processing returns, the shipping, and the reputational damage consumed any savings from the cheaper fabric. That $200 per-unit savings on fabric turned into a much larger problem.

If your customer expects to stand in rain, don't source bulk water resistant fabric. Source waterproof breathable fabric with a measured hydrostatic head. And if you're not sure what your customer expects, ask—because the answer determines everything downstream.

How to Choose Waterproof Fabric for Wholesale: What I Check Now

I've been doing this long enough that I don't trust the description line in a database anymore. There's just too much variation between suppliers and between product codes. Here's my current pre-order checklist for Pertex and other waterproof/breathable fabrics:

1. Confirm the Membrane System

Is this a 2-layer, 2.5-layer, or 3-layer construction? That's not just a spec sheet debating point. It changes durability, weight, and price. For most apparel brands, 3-layer Shield is the workhorse for serious hardshells. 2-layer is often used for lighter jackets with a separate mesh liner. 2.5-layer is a compromise—lighter than 2-layer with a printed backing instead of a mesh liner.

2. Check the Actual Waterproof and Breathability Numbers

Ask for the hydrostatic head rating and the moisture vapor transmission rate (MVTR) for each specific fabric code. For Pertex Shield, retailers and brands typically look at a hydrostatic head of 10,000mm or higher, with breathability in the range of 15,000-25,000 g/m²/24h depending on the exact membrane and face fabric. (Based on Pertex's published specifications; verify current figures for your chosen code.)

3. Verify the Face Fabric and Weave

What nylon or polyester is used? Is it ripstop, and at what denier? A 20D face fabric will be lighter and more packable but less abrasion-resistant than a 40D or 70D face. If you're making a backpack or a mountaineering hardshell, you can't just copy the spec from an ultralight running jacket and expect it to survive rocks and ice.

4. Ask for the Full Lamination Stack

The face fabric, membrane, and backing liner aren't just a loose assembly. They're laminated together. The lamination method and quality affect how it drapes, how it moves with the body, and whether it delaminates over time. If your supplier can't explain the lamination stack, you're not at a technical fabric vendor—you're at a jobber.

5. Get a Physical or Digital Prototype Before Committing

On a 500-meter production run, a small difference in hand feel or stiffness is a big deal. It affects pattern cutting, sewing, and whether the garment looks right in the end. I've learned the hard way that a fabric that looks great on a color card can behave completely differently when sewn into a sleeve.

Why Pertex Makes Sense for OEM and Private Label

One of Pertex's strengths as a brand for B2B buyers is that it's available for OEM and private label programs. You don't have to build your own membrane technology or try to convince customers with a generic "waterproof breathable" label. Pertex has a known reputation in outdoor retail, and using it can accelerate your brand's credibility—as long as you choose the right product family.

That said, there's a tradeoff. With Pertex, you're using a branded technology that your competitors can also use. Differentiating on the fabric alone is harder than differentiating on design, fit, features, and warranty. The fabric is the foundation, not the whole story.

From a total cost standpoint, I'd also note that branded technical fabrics like Pertex Shield aren't typically the cheapest option. But that's not the right comparison. The right comparison is total cost over the product's life, including returns, warranty claims, and brand trust. A higher-performing fabric that does what your marketing says is almost always a better deal than a generic waterproof coating that fails after a few washes.

Where Pertex Isn't the Right Answer

I don't want to oversell this. There are situations where Pertex isn't the right choice, and you should hear that from me rather than from a bad outcome.

If your product is a low-cost fashion rain jacket for occasional city use, a branded performance membrane may add cost you can't justify. A simpler PU-coated nylon might meet your requirements at half the price. You're paying for a performance ceiling you don't need.

Also, if you're sourcing a very large quantity with a very tight target price, a premium brand like Pertex might not be competitive with generic alternatives. In my experience, branded technical fabrics have less price flexibility than generic ones. That doesn't mean they're not worth it—it means you need to know your margin targets before you start negotiating.

And one more honest note: Pertex is a fabric brand, not an apparel manufacturer. They supply fabric to factories and brands, but they don't make jackets themselves. So if you're a brand looking for a full garment production partner, you'll need to work with a factory that sources Pertex fabric (or use a CMT / FOB supplier that handles both fabric and sewing).

Bottom Line

If you're choosing wholesale waterproof fabric and Pertex is on your shortlist, the single most valuable thing you can do is specify the exact product family and construction before you ask for pricing. Pertex Shield is the waterproof membrane choice. Pertex Quantum is the lightweight shell choice. Ripstop is a weave, not a performance spec. And water resistance is not waterproofing.

I've made these mistakes so you don't have to, but I've also learned that no checklist replaces asking direct questions. When in doubt, ask your supplier: full fabric code, membrane type, lamination construction, and test data. If they hesitate, that's your answer.

Pricing note: technical fabric prices vary widely by quantity, lamination method, and face fabric. Always request current quotes from multiple fabric distributors and verify specs against Pertex's official materials.

Lucia Bianchi
Lucia Bianchi

Lucia Bianchi is a woven apparel-fabric analyst covering cotton, linen, wool, rayon, denim, shirting, twill, satin, poplin, and blended garment fabrics. She applies the ISO 1833 series for fibre composition and ISO 105-C06 for laundering colourfastness while checking GSM, yarn count, usable width, shrinkage, skew, shade grade, drape, and surface defects. Her specification guides help designers, sourcing teams, and mills align fibre claims, lab dips, bulk tolerances, care conditions, and garment performance before production approval.